Co-Developed by Folks Automation x Universitas Indonesia

Edge AI Controller
FE2001-UI Series

Next-generation industrial automation controller combining high-performance Quad-Core 64-bit ARM computing, dedicated Edge AI NPU acceleration, and isolated industrial I/O in a rugged DIN-rail form factor.

⚙

Processing Architecture

Quad-Core ARM Cortex-A76 @ 2.4GHz

🚀

Intelligence Engine

Dedicated Edge AI NPU

🔄

Onboard Industrial I/O

4 DI (Optoisolated), 4 Relay DO, 2 AI

🔒

Management & Security

Web Console 2FA + Dual Gigabit LAN

Request Consultation / Quote 📄 Download Datasheet (PDF)

Edge AI Controller FE2001-UI Folks Automation

Industrial DIN-Rail Mounting

🤖

Real-Time Edge AI Inference

Powered by a dedicated Edge AI NPU to execute high-speed computer vision and anomaly detection models on the shop floor without cloud latency.

🔗

IT / OT Network Isolation

Dual independent Gigabit Ethernet interfaces ensure physical separation between corporate IT networks and mission-critical OT fieldbuses.

🔧

FolksLogic IEC 61131-3 SoftPLC

Direct web-based Structured Text (ST) control logic programming from any browser without requiring cumbersome desktop software licensing.

📡

Integrated Industrial Interfaces

Built-in isolated RS-485, CAN bus, 4 optoisolated 24V digital inputs, 4 form-A relay outputs, and dual 16-bit analog inputs.

Parameter	FE2001-UI Detailed Specifications
Computing & Processing Core
Processor	Broadcom BCM2712 Quad-core ARM Cortex-A76 (ARM v8 64-bit) @ 2.4 GHz, 512KB L2 caches & 2MB shared L3 cache
AI NPU Accelerator	Dedicated Edge AI NPU Accelerator
System Memory (RAM)	4GB / 8GB LPDDR4X-4267 SDRAM
Storage	High-speed M.2 NVMe SSD Storage + MicroSD Card Slot
Operating System	Industrial Linux (Debian Based) optimized for Real-Time Automation
Onboard Industrial I/O
Digital Input (DI)	4x Digital Input Channels (24VDC, Optically Isolated)
Digital Output (DO)	4x Relay Output Channels (Form-A, Potential-Free Contact)
Analog Input (AI)	2x Channels 0–20mA / 4–20mA (16-bit High Precision ADC)
Communication & Interfaces
Ethernet	2x Gigabit Ethernet (10/100/1000 Mbps RJ45) — IT & OT Network Isolation
Serial Fieldbus	1x RS-485 (Half-duplex, Industrial Terminal Block with surge protection)
CAN Bus	1x CAN Bus (can0)
Wireless Connectivity	Dual-band 802.11ac Wi-Fi, Bluetooth 5.0 / BLE, SMA Antenna slot for optional 4G LTE
USB & Video	2x USB 3.0, 2x USB 2.0, 1x USB-C, 2x Micro-HDMI (Dual 4K60p display support)
Protocols & Environmental
Industrial Protocols	Modbus TCP Server (Port 502), Modbus RTU Master/Slave, CODESYS Network Variable List (NVL UDP 1202), MQTT, HTTP REST
Input Voltage	12V – 24V DC Industrial Grade Power Supply
Mounting	Standard Industrial DIN-Rail (35mm) / Panel Mount

Integrated Web Management Console

FE2001-UI comes with a native web dashboard accessible directly via local browser, empowering engineers to configure and diagnose field equipment without proprietary desktop software.

●
Real-Time Control Center: Monitor live CPU/RAM utilization, operating temperature, NVMe health, and dual Ethernet statuses.
●
Manual I/O Control & Telemetry: Toggle relay outputs on the fly, observe optical digital inputs, and read calibrated 4-20mA analog signals.
●
RS-485 Diagnostics Tool: Transmit custom HEX/ASCII frames and analyze live bus responses right from the browser.
●
Two-Factor Authentication (2FA TOTP): Protected login enforced via authenticator tokens (Google Authenticator / Aegis) for industrial cyber hygiene.

fe2001-console.local:8080

System Health OPTIMAL (41.2°C)

CPU & Edge AI NPU Load: 12% | Inference: ACTIVE

IT LAN (eth0) 192.168.1.150 (Connected)

OT LAN (eth1) 10.10.20.1 (Modbus TCP 502)

SoftPLC Engine FolksLogic ST [RUNNING]

Security State 2FA TOTP ENFORCED

FE2001-UI Web Management Console Interface:

[PLACEHOLDER: FE2001-UI Web Management Console Screenshot]

Supported Software

Engineered with an open architecture compatible with global industrial standards, SCADA platforms, relational databases, and modern automation runtimes.